The TDR 100 is in the 100 t class and is designed for traversing distances in mining and tunnel construction, as well for use in recovery operations. With a cutting output of 300 or 400 kW, it cuts compressive strengths of up to 140* MPa. The feed of the cutting arm measures 600 mm. Additional equipment allows for a wide range of applications.
| Technical data | |
| Weight | 100 t |
| Cutting output | 300–400 kW |
| Overall output | 482–582 kW |
| Machine length | 13,250 mm |
| Machine width, loading table min. | 4,000 mm |
| Machine height | 2,020 mm |
| Cutting cross-section | 48 m² |
| Cuts the following rock hardnesses | 140 MPa* |
| Cutting arm feed | 600 mm |
| Width of caterpillar treads | 700 mm |
| Ground compression | 18 N/cm² |
| Undercut | 320 mm |
| Hill climbing ability | 20 gon |
*ADVANTEC TDR 100 is an electrically powered and crawler-mounted roadheader which is engineered to cut hard and abrasive rock mass of up to 140 MPa unconfined compressive strength (UCS), and in extreme cases of even up to 180 MPa in tunneling applications.